Which of the following statements about prefix segments and adjacency segments are correct?
Correct Answer: C,D
Comprehensive and Detailed In-Depth Prefix Segment: Represents a destination prefix in the network. A Prefix SID (Segment Identifier) is a globally unique SID that maps to an IP prefix and is within the SRGB (Segment Routing Global Block) range. Therefore, C is correct. A is incorrect because a prefix SID is within the SRGB range, not out of it. Adjacency Segment: Represents a link (adjacency) between two nodes. An Adjacency SID is locally significant and typically allocated from the SRLB (Segment Routing Local Block) range. It uniquely identifies a link between nodes in the source node's local routing table. Therefore, D is correct, while B is incorrect because an adjacency SID is not necessarily an offset within the SRGB. Reference: Huawei HCIE Datacom Official Certification Guide Huawei SR-MPLS Configuration Guide RFC 8402: Segment Routing Architecture
Question 42
The following statement about isis protocol LSP messages is correct
Correct Answer: A,B,C,D
Question 43
Regarding the Stub region in the OSPF protocol, the following statement is correct.
Correct Answer: A,B,C,D
Question 44
As shown in the figure, PE1 establishes an EVPN peer relationship with each of PE2 and PE3. When the network is initialized, CE1 sends an ARP request packet. Which of the following statements are correct about how a PE processes the packet?
Correct Answer: A,B,D
Understanding EVPN (Ethernet VPN) and ARP Request Handling 🔹 What is EVPN? EVPN (Ethernet VPN) is a BGP-based control plane for VXLAN that improves Layer 2 & Layer 3 network scalability. Eliminates flood-and-learn behavior using BGP MAC/IP advertisement routes. 🔹 Why is an ARP Request Sent? When CE1 (192.168.1.1/24) wants to communicate with CE2 (192.168.1.2/24), it sends an ARP request to discover the MAC address of CE2. 🔹 How Does EVPN Process the ARP Request? 1️⃣ PE1 receives the ARP request from CE1. 2️⃣ PE1 sends a MAC/IP advertisement route (Type 2 EVPN route) to inform PE2 and PE3 of CE1's MAC address. 3️⃣ PE1 forwards the ARP request as BUM (Broadcast, Unknown unicast, and Multicast) traffic to PE2 and PE3. 4️⃣ PE3 (Designated Forwarder - DF) forwards the packet to CE2. 5️⃣ PE2 (Non-DF) does NOT forward the packet to avoid loops. Analysis of the Answer Choices: ✅ A. When forwarding the packet to PE3, PE1 needs to add the BUM traffic label allocated by PE3 to the packet. Correct: BUM (Broadcast, Unknown Unicast, Multicast) traffic in EVPN is encapsulated with a special label assigned by the receiving PE. PE1 adds the BUM traffic label for PE3 before sending the ARP request. ✅ B. PE1 sends a MAC/IP advertisement route carrying the MAC address of CE1. Correct: EVPN Type 2 MAC/IP advertisement routes are sent to inform other PEs of CE1's MAC/IP binding. ❌ C. PE2 forwards the packet to CE1. Incorrect: PE2 is the Non-Designated Forwarder (Non-DF) and does NOT forward BUM traffic to avoid loops. ✅ D. PE3 forwards the packet to CE1. Correct: PE3 is the Designated Forwarder (DF) for this segment, meaning it forwards the ARP request to CE2. ✅ Reference: Huawei HCIE-Datacom Guide - EVPN BGP MAC/IP Advertisement and BUM Traffic Handling Real-World Application: Data Center Interconnect (DCI): EVPN prevents excessive ARP flooding across VXLAN networks. Enterprise Campus Networks: Uses EVPN VXLAN to scale Layer 2 connectivity across multiple locations.
Question 45
After the reset isis all command is run, the specified IS-IS process is reset, and all involved IS-IS neighbor relationships are re-established; however, IS-IS statistics are not cleared.
Correct Answer: B
Comprehensive and Detailed Explanation: The reset isis all command resets the entire IS-IS process, including:# Neighbor adjacencies# LSDB (Link- State Database)# All IS-IS-related statistics Key Points: * This command resets IS-IS completely, causing temporary route convergence delays. * All IS-IS statistics are cleared because the process restarts from scratch. Since the question states that IS-IS statistics are not cleared, which is incorrect, the correct answer is FALSE. # Reference: Huawei HCIE Datacom - IS-IS Troubleshooting and Reset Commands