Exhibit: Referring to the exhibit, the operator user is unable to save configuration files to a usb stick the is plugged into SRX. What should you do to solve this problem?
Correct Answer: B
To solve the problem of the operator user being unable to save configuration files to a USB stick that is plugged into SRX, you need to add the system-control permission flag to the operations class. The other options are incorrect because: A) Adding the floppy permission flag to the operations class is not sufficient or necessary to save configuration files to a USB stick. The floppy permission flag allows the user to access the floppy drive, but not the USB drive. The USB drive is accessed by the system permission flag, which is already included in the operations class1. C) Adding the interface-control permission flag to the operations class is also not sufficient or necessary to save configuration files to a USB stick. The interface-control permission flag allows the user to configure and monitor interfaces, but not to save configuration files. The configuration permission flag, which is also already included in the operations class, allows the user to save configuration files1. D) Adding the system permission flag to the operations class is redundant and ineffective to save configuration files to a USB stick. The system permission flag allows the user to access the system directory, which includes the USB drive. However, the operations class already has the system permission flag by default1. The problem is not the lack of system permission, but the lack of system- control permission. Therefore, the correct answer is B. You need to add the system-control permission flag to the operations class to solve the problem. The system-control permission flag allows the user to perform system-level operations, such as rebooting, halting, or snapshotting the device1. These operations are required to mount, unmount, and copy files to and from the USB drive2. To add the system-control permission flag to the operations class, you need to perform the following steps: Enter the configuration mode: user@host> configure Navigate to the system login class hierarchy: user@host# edit system login class operations Add the system-control permission flag: user@host# set permissions system-control Commit the changes: user@host# commit Reference: login (System) How to mount a USB drive on EX/SRX/MX/QFX Series platforms to import/export files
Question 62
You have the NAT rule, shown in the exhibit, applied to allow communication across an IPsec tunnel between your two sites with identical networks. Which statement is correct in this scenario?
Correct Answer: A
Question 63
What are three core components for enabling advanced policy-based routing? (Choose three.)
Correct Answer: A,C,D
To enable Advanced Policy-Based Routing (APBR) on SRX Series devices, three key components are necessary: filter-based forwarding, routing instances, and APBR profiles. Filter-based forwarding is utilized to direct specific traffic flows to a routing instance based on criteria set by a policy. Routing instances allow the traffic to be managed independently of the main routing table, and APBR profiles define how and when traffic should be forwarded. These elements ensure that APBR is flexible and tailored to the network's requirements. Refer to Juniper's APBR Documentation for more details. Advanced policy-based routing (APBR) in Juniper's SRX devices allows the selection of different paths for traffic based on policies, rather than relying purely on routing tables. To enable APBR, the following core components are required: * Filter-based Forwarding (Answer A):Filter-based forwarding (FBF) is a technique used to forward traffic based on policies rather than the default routing table. It is essential for enabling APBR, as it helps match traffic based on filters and directs it to specific routes. Configuration Example: bash Copy code set firewall family inet filter FBF match-term source-address 192.168.1.0/24 set firewall family inet filter FBF then routing-instance custom-routing-instance * Routing Instance (Answer C):A routing instance is required to define the separate routing table used by APBR. You can create multiple routing instances and assign traffic to these instances based on policies. The traffic will then use the routes defined within the specific routing instance. Configuration Example: bash Copy code set routing-instances custom-routing-instance instance-type forwarding set routing-instances custom-routing-instance routing-options static route 0.0.0.0/0 next-hop 10.10.10.1 * APBR Profile (Answer D):The APBR profile defines the rules and policies for advanced policy-based routing. It allows you to set up conditions such as traffic type, source/destination address, and port, and then assign actions such as redirecting traffic to specific routing instances. Configuration Example: bash Copy code set security forwarding-options advanced-policy-based-routing profile apbr-profile match application http set security forwarding-options advanced-policy-based-routing profile apbr-profile then routing-instance custom-routing-instance Other Components: * Routing Options (Answer B)are not a core component of APBR, as routing options define the general behavior of the routing table and protocols. However, APBR works by overriding these default routing behaviors using policies. * Policies (Answer E)are crucial in many network configurations but are not a core component of enabling APBR. APBR specifically relies on profiles rather than standard security policies. Juniper Security Reference: * Advanced Policy-Based Routing (APBR): Juniper's APBR is a powerful tool that allows routing based on specific traffic characteristics rather than relying on static routing tables. APBR ensures that specific types of traffic can take alternate paths based on business or network needs. Reference: Juniper Networks APBR Documentation.
Question 64
Which two statements about policy enforcer and the forescout integration are true? (Choose two)
Correct Answer: A,C
Question 65
Exhibit. Referring to the exhibit, which two statements are true? (Choose two.)
Correct Answer: A,B
The system security profile named sp-1 has designated resources for policies and zones with a maximum of 100 and a reservation of 50 each. For NAT with no port address translation (nat-nopat- address), there is a maximum of 115 and a reservation of 100, and for static NAT rules (nat-static-rule), there is a maximum of 125 with 100 reserved. When considering tenant systems, the profile applied (sp-1) will dictate the resources available to the tenant system named c-1. The c-1 TSYS has a reservation for the security flow resource. - This would be true if the 'security flow resource' refers to policies and zones since there are reservations made in the profile sp-1. The c-1 TSYS can use security flow resources up to the system maximum. - This is generally true for any tenant system unless there are explicit limits set that are lower than the system maximum.
