After finishing foundation on an AHV cluster, a consultant is preparing to plug into the customer network given the following set of requirements:
* All network traffic on trunks is tagged
* Customer is using LACP
* A native VLAN is not in use
Which set of commands should the consultant use to ensure cluster connectivity on customer equipment?

• A.change_cvm_vlan 10
  ovs-vsctl set port br0 tag=10
  ovs-vsctl set port br0-up bond_mode=balance-tcp
• B.change_cvm_vlan 0
  ovs~vsctl set port br0 tag=0
  ovs~vsctl set port br0-up bond_mode=active-backup
• C.change_cvm_vlan 0
  ovs-vsctl set port br0 tag=0
  ovs-vsctl set port br0-up bond_mode=balance-tcp
• D.change_cvm_vlan 10
  ovs-vsctl set port br0 tag=10
  ovs-vsctl set port br0-up bond_mode=balance-slb

Comment: *

Name: *

Email: *

Verification: *

A consultant is preparing to add new nodes into an existing cluster. The current cluster AOS version is 5.8. The new expansion node is currently running AOS 5.9 code. The cluster must continue to run at its current AOS version.
Which method can be used to successfully add the node?

• A.Use the CLI and enter cluster add-node node-serial="node_serial".
• B.Use Prism Element to Expand the cluster and select the re-image option.
• C.Use Prism Element, which will downgrade the node by default during the node add process.
• D.Upgrade the cluster to 5.9 and add the node through Prism Element.

Comment: *

Name: *

Email: *

Verification: *

A customer has a G6 AHV cluster with 4x10GbE NICs on each node and the following configuration:
* Networking is set to default
* Only two NICs are connected
The customer receives the following critical message:
The NIC is disconnected from the switch, or the switchport is failing.
What should the consultant verify to resolve the issue?

• A.The VLANs are configured correctly on the switch or tagged on the cluster.
• B.The NICs are configured for active-backup.
• C.The NICs are connected for balance-slb.
• D.The other two 10GbE connections are removed from the default bond.

Comment: *

Name: *

Email: *

Verification: *

A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two settings should be turned on to meet the requirements? (Choose two.)

• A.vShpere DRS
• B.vSphere vMotion
• C.vSphere HA
• D.vSphere Power Management

Comment: *

Name: *

Email: *

Verification: *

A consultant is using a customer's switch for installation. Although the 10GbE ports for each of the hosts are connected to the switch, the nodes fail to be discovered.
What is causing the issue?

• A.IPMI port is not plugged in.
• B.10GbE ports are configured with the incorrect duplex setting.
• C.IPv6 is not enabled on the switch.
• D.Foundation VM is running on a Windows host.

Comment: *

Name: *

Email: *

Verification: *