An empty-configured MSR router is connected to the same OSPF network through multiple interfaces, and OSPF is enabled on all these interfaces. After the configuration is completed, the router has successfully learned the OSPF routes in the network.
Now run the following command on an OSPF interface of the router:
[MSR-GigabitEthernet0/0]ospf cost 256
In the case of keeping other configurations unchanged, the correct understanding of the configuration is _____.
It is found in the routing table of an MSR 30 router that the cost value of the route to the destination network segment 61.232.200.253/22 is 16, so the correct description of this route entry is ______. (Multiple choice)
Two MSR routers MSR-1 and MSR-2 are connected through the WAN and dynamically complete remote route learning through RIPv2.
After stable for 2 minutes, the RIP update message from MSR-2 is received on MSR-1, which contains the route with Cost of 14, then ______. (Multiple choice)
If a port running STP in the Ethernet switch does not receive or forward data, receives and sends BPDUs, and does not perform address learning, then the port should be in the ______ state.
The role of FTP data connection includes ______. (Multiple choice)
