You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?

• A.
• B.
• C.
• D.

Comment: *

Name: *

Email: *

Verification: *

For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?

• A.large ingress packet buffers
• B.large egress packet buffers
• C.per port ASICs
• D.VSX

Comment: *

Name: *

Email: *

Verification: *

When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

• A.hello interval is disabled by default
• B.hello interval is based on the value set by dead interval
• C.hello interval 100ms by default
• D.hello interval is 1s by default

Comment: *

Name: *

Email: *

Verification: *

What is a primary benefit of BSS coloring?

• A.BSS color tags improve performance by allowing clients on the same channel to share airtime.
• B.BSS color tags are applied to client devices and can reduce the threshold for interference
• C.BSS color tags are applied to Wi-Fi channels and can reduce the threshold for interference
• D.BSS color tags improve security by identifying rogue APs and removing them from the network.

Comment: *

Name: *

Email: *

Verification: *

A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP-group settings.
After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access-Accept to the AP through which tunnel?

• A.IPsec tunnel
• B.Split tunnel
• C.GRE tunnel
• D.PAR tunnel

Comment: *

Name: *

Email: *

Verification: *