To achieve the Sustainable Sites Credit, Light Pollution Reduction, Option 1. BUG Rating Method, projects must demonstrate

• A.all luminaires have full cutoff fixtures
• B.all luminaires have a minimum color temperature of 3500 K
• C.all luminaires meet acceptable fixture ratings for the project's Model Lighting Ordnance (MLO) lighting zone
• D.all luminaires are mounted at least three mounting heights from the lighting boundary

Comment: *

Name: *

Email: *

Verification: *

When calculating the reverberation time of a room, which of the following pieces of information is least relevant?

• A.Height and width of room
• B.Noise reduction coefficient of the ceiling surface
• C.Sound absorption coefficient of the floor surface
• D.Operating sound level of nearest HVAC equipment

Comment: *

Name: *

Email: *

Verification: *

A Healthcare Project is constructing a new building adjacent to an existing LEED Certified hospital facility. The new building's location is on the same hospital campus as the certified facility. The entire hospital campus was analyzed with an Environmental Site Assessment (ESA) as part of the certified facility's project scope. The new building project needs to complete a new Phase I ESA if

• A.the Phase II ESA uncovers suspected contamination
• B.contamination was identified by the certified facility
• C.the certified facility's Phase I ESA is older than 180 days
• D.the local equivalent standard is more stringent than ASTM E1527-05

Comment: *

Name: *

Email: *

Verification: *

What standard should an engineer use when establishing minimum ventilation rates for a new mechanically ventilated space to earn Indoor Environmental Quality, Minimum Indoor Air Quality Performance?

• A.Local building code
• B.ASHRAE 62.1-2010
• C.International Mechanical Code 2012
• D.The ventilation code requiring the greatest volume of outside air

Comment: *

Name: *

Email: *

Verification: *

Which of the following is required for a cooling tower or evaporative condenser in Water Efficiency Prerequisite, Indoor Water Use Reduction?

• A.Alkalinity testing and ENERGY STAR® rating
• B.Non potable water sources and bacteria testing
• C.Water treatment calculations and system performance narrative
• D.Makeup water meters, conductivity controllers and overflow alarms

Comment: *

Name: *

Email: *

Verification: *